company insight

Oscillators for Commercial Off The Shelf Programs

COT’s components are not new to the defence and aerospace industries, but the momentum behind using Commercial Off the Shelf components, rather than highly specialized military equipment, has intensified in recent years.

This is partly due to the improved production quality of the industrial grade product that is now available.


For engineers the use of C.O.T.’s components is a matter of risk assessment and risk mitigation in their particular system design.


The correct choice of supplier is vital when procuring frequency components for this type of application.


A good supplier of crystals and oscillators should adopt a four-point mitigation strategy to ensure reliability and quality of the product.

1) Reliability Testing 

Routine reliability data should be available for C.O.T.s parts, a typical cycle of reliability testing is shown below in figure 1.      

2) Traceability:

A date code alone is insufficient to provide production batch traceability it merely indicates the date the product was last tested prior to shipment. The inclusion of a lot-code will identify the exact production batch, operator and production line the parts were produced on. An example can be seen below in figure 2.

Obviously the prime motivation is to reduce the build cost of systems by down-rating some of the military specification components. 
However, care should be taken when purchasing industrial product for these applications as there are multitude of frequency product suppliers to choose from, all of which will have ISO9001 quality systems.

Suppliers will often state that full traceability is offered, but in many cases the customer will not know where  the factory is actually located other than a general statement of China or Taiwan, which then means that they are reliant on statements from the supplier.
That is not to say that suppliers are not offering full traceability or just providing vague information, but in ISO9000 jargon, it should be demonstrable.

In some cases customers may required specific tests to be performed which relates to some aspect of the application for instance; a restart test at a specific temperature, a good supplier will be able to offer this facility.


Another important aspect to consider is gold embrittlement, gold embrittlement and voiding can appear in SMT solder joints when using gold-finished components. This means that over time the components may become less reliable in terms of their mechanical bond strength to the PCB.

3) QA Access:

Free access to the production facility should be available even if the option is not taken up by the customer.

4) Stability of Supply:

Is the supplier able to demonstrate the stability of the supply chain, this is vital, especially as many C.O.T.s applications do not require huge volumes of product but could have an extended production life.

Obviously the prime motivation is to reduce the build cost of systems by down-rating some of the military specification components. 
However, care should be taken when purchasing industrial product for these applications as there are multitude of frequency product suppliers to choose from, all of which will have ISO9001 quality systems.

Suppliers will often state that full traceability is offered, but in many cases the customer will not know where  the factory is actually located other than a general statement of China or Taiwan, which then means that they are reliant on statements from the supplier.
That is not to say that suppliers are not offering full traceability or just providing vague information, but in ISO9000 jargon, it should be demonstrable.

In some cases customers may required specific tests to be performed which relates to some aspect of the application for instance; a restart test at a specific temperature, a good supplier will be able to offer this facility.


Another important aspect to consider is gold embrittlement, gold embrittlement and voiding can appear in SMT solder joints when using gold-finished components. This means that over time the components may become less reliable in terms of their mechanical bond strength to the PCB.

J STD-001 Revision “F “ states that gold shall be removed:


A. From at least 95% of the surfaces to be soldered of the through-hole component leads with >2.54 μm [100 μin] gold thickness and all through-hole leads that will be hand soldered regardless of gold thickness.


B. From 95% of all surfaces to be soldered of surface mount components regardless of gold thickness.


C. From the surfaces to be soldered of solder terminals plated with >2.54 μm [100 μin] gold thickness and from all solder cup terminals, regardless of gold thickness.


A double tinning process or dynamic solder wave may be used for gold removal prior to mounting the component on the assembly.

Many customers will consider automotive approved parts manufactured to AEC-Q200, again care needs to be taken in this area as many of these components are produced for high volume usage and obtaining small quantities may present a challenge.


COT’s programmes will continue to grow in the years to come and it is up to both the customer and supplier to work closely together to ensure that risk mitigation is maintained.

GET IN TOUCH

EUROQUARTZ

Blacknell Lane, Crewkerne,

Somerset, UK, TA18 7HE


www.euroquartz.co.uk

info@euroquartz.co.uk

+44 (0)1460 230000

Go to article: The year in defenceGo to article: In this issueGo to article: TECHWAN SA | Company InsightGo to article: TECHWAN SAGo to article: ContentsGo to article: VPT | Company InsightGo to article: VPT, Inc.Go to article: Barricading the Baltic Sea: Nordic nations boost military spending Go to article: MMDGo to article: MMDGo to article: Intelligent design: inside France’s €1.5bn AI strategyGo to article: AAR Mobility SystemsGo to article: Drone plans for sale: military documents on the dark webGo to article: HescoGo to article: Information overload: Visualising electronic warfare to manage data proliferationGo to article: Protomatic | Company InsightGo to article: Protomatic MedicalGo to article: Green military structures: saving energy and livesGo to article: Arpa | Company InsightGo to article: ArpaGo to article: Rise of the ultra-light military vehicleGo to article: TSS InternationalGo to article: The US Army’s Big Six and the future of autonomous warfare Go to article: Technicki RemontGo to article: How autonomous delivery drones could revolutionise military logisticsGo to article: Inside NATO’s Joint Air Power StrategyGo to article: Euroquartz Ltd | Company InsightGo to article: EuroquartzGo to article: Innovation at the edge: the top air defence trends by domain Go to article: Accurate Biometrics | Company InsightGo to article: Accurate BiometricsGo to article: The $1 trillion question: is the F-35 project too big to fail? Go to article: Statni ustav jaderneGo to article: SHiELD: the US Air Force’s aircraft-mounted laser weaponGo to article: AfterGlowGo to article: GlobalEye: airborne surveillance takes new heights Go to article: Optical Scientific Incorporated | Company InsightGo to article: Optical Scientific IncorporatedGo to article: SEA 5000: building Australia’s future frigatesGo to article: (UN)MANNED | Company InsightGo to article: (UN)MANNED NVGo to article: Contenders for the US Navy’s future Guided Missile Frigate show faith in proven designsGo to article: BellridgeGo to article: Inside BAE Systems' digital naval shipyardGo to article: Seneca MineralGo to article: Armed and intelligent: The US Navy’s future UUVsGo to article: Stokota | Company InsightGo to article: StokotaGo to article: Advancements in hypersonic missiles spark excitement and concernGo to article: B GSE Group | Company InsightGo to article: B GSE GroupGo to article: Sky Sabre: inside the UK’s missile defence systemGo to article: Evans Capacitor | Insight CompanyGo to article: Evans CapacitorGo to article: Slitherine’s Command: the wargame transforming operational simulationGo to article: SUNAEROGo to article: Live and virtual environments shape the future air combat trainingGo to article: Agog Vivid | Company InsightGo to article: Agog Vivid LimitedGo to article: Exercise Toxic Dagger: training the UK military to mitigate CBRN threatsGo to article: BetalightGo to article: Industry eventsGo to article: Omnetics Connector CorporationGo to article: Next issue previewGo to article: The GDT team: contact us